I traded for a kriya wolf today. is she suppost to have a heat sink overload on the secondclick fo heat. The Tec. Readouts say she is, and so does the unit selection thing on realms. Mine has all of the same minuses, and everything else is the same but she has a heat sink overlaod on the second click.\. is mine a misprint, or are the readouts wrong?

Twig

When you're starting with the green mode of the heat scale, it takes three clicks before you see the dreaded yellow with my SW Tundra Wolf. But according to the SW Tundra Wolf as shown in the Units-section of this forum, it's apparently correct for Kriya Wolf to have a heat sink overload on the second click of heat. Funny.

the heatsink overload isn't the problem - the ammo explosion is

There's a lot of yellow in the SW Tundra Wolf's heat dial. Almost looks like a less playable Swordsworn-unit. This game REALLY needs a change in the heat rules for 'Mechs... this is just silly!

There is no yellow until the 3ed click right?

According to the units-section of this forum, the yellow on the second click is right. But my Tundra Wold doesn't have yellow on that click. One would think that I own a misprint. Has there been an errata about Kriya Wolf in the FAQ?

I dont think so, and the unit selection isn't official...it is suppost to only be a convience.

I donno

Twig

It has yet to be changed in the FAQ, so until it is, you go by the dial.

Both MWrealms & WK units sections are full of errors. THis is why you go by the dial, NOT the online tech readouts.

If you're worried about the dial, just click through it until you see a small 3 didget number. check to see if that number matches the unit's number on the base.

I also have Kriya no colors till the 3rd click so thats the way its supposed to be till its FAQed.

Looks like John26 and I have the same Tundra Wolf, so it's heat dial as seen on our Kriya's should be tournament legal and everything.